Since 2010
Tap repair in Pontefract
If a tap is dripping, turn it off at the isolating valve under the sink and call 01924 266211.
If you want to know what it is likely to be, a dripping spout is a washer or a ceramic cartridge, and both are cheap parts rather than a new tap.
We have been repairing and replacing taps in Pontefract from Queens Avenue since 2010, and we cover Knottingley, Castleford, Featherstone, Ackworth, Darrington and Wakefield.
Answered out of hours, every hour
You know the price before we start
Plumbing, electrics and roofing, one contractor
A leak that has taken out the lights needs a plumber and an electrician. You call once, and both get dealt with on the same visit.
Who we work with
Homes, rentals and commercial property in Pontefract and surrounding areas.
The same trades, the same standards and the same written pricing whether it is a family home, a rental portfolio or a commercial building.
Homeowners
Repairs, replacements and improvements. Priced clearly before we start.
- ✓ Every trade under one contractor
- ✓ Free written quotes, no obligation
- ✓ All work fully guaranteed
Landlords and letting agents
Tenanted property looked after without you having to be there.
- ✓ Direct contact with your tenant
- ✓ Photographs and sign-off on every job
- ✓ Gas and electrical certification
Commercial and healthcare
Maintenance and repairs planned around the people using the building.
- ✓ Out of hours attendance
- ✓ Work planned around occupants
- ✓ 24/7 emergency cover, 365 days
Below is what each fault actually is, which ones you can check yourself for nothing, and what it costs to have somebody out.
What goes wrong with taps
Dripping from the spout
On an older tap it is a washer, on a modern quarter-turn tap it is a ceramic cartridge.
Either way it is a part and a short visit, and the part is the cheap bit.
Leaking from the base or around the handle
That is the O-rings or the spout seal, and it is very common on monobloc mixers where the spout swivels, because that joint gets worked every day. It is another part rather than a new tap.
Stiff, squeaky or seized
Limescale in the mechanism, sometimes it frees up and sometimes the cartridge has had it.
It is worth trying before replacing, because a seized tap is not necessarily a dead one.
Low flow from one tap only
Nearly always the aerator in the end of the spout, which unscrews and cleans in two minutes.
Try that before you ring anybody. If it fixes it you have saved a callout, and we would rather you did.
Spluttering, or running then stopping
An airlock, usually after work on the system or after the water has been off.
It often clears itself, and when it does not it is a short job rather than a big one.
Seized isolation valves
The little valves under the sink that are supposed to let you turn one tap off without draining the house.
They seize shut, or worse, seize open, and you find out at the worst possible moment. It is worth replacing while somebody is already under there.
Hard water, and what it does
The water round here is hard enough to matter. It furs up aerators, stiffens cartridges and shortens the life of every moving part in a tap.
It is also why the same tap fails the same way every few years, and why descaling the aerators twice a year genuinely extends the life of the fitting.
| What is happening | Who to call first |
|---|---|
| A smell of gas | National Gas Emergency Service 0800 111 999 |
| A power cut, or electrics tripping with no obvious cause | National power cut line 105 |
| No water across the whole street | Yorkshire Water |
| Water coming up through a road or pavement | Yorkshire Water |
| A shared drain backing up across several houses | Yorkshire Water |
| A blocked road gully or surface water drain | Wakefield Council |
If you smell gas, do not switch anything on or off, open the windows, get everybody out, and ring 0800 111 999 before you ring us.
Kitchen mixers, and why they go first
The kitchen tap gets used more than every other tap in the house put together, and monobloc mixers have more moving parts than a pillar tap. So it is usually the first to drip, the first to stiffen and the first to leak at the base.
None of that means it needs replacing, it just means it gets there sooner.
| Problem | Our honest answer |
|---|---|
| Burst pipe, water you cannot stop | Call now |
| Water through a ceiling or light fitting | Call now |
| Sewage backing up into the property | Call now |
| No water at all in the property | Call now |
| Toilet blocked and it is the only toilet | Call now |
| Dripping tap | Morning |
| One slow drain, still moving | Morning |
| Running toilet you can isolate at the valve | Morning |
| One radiator cold | Morning |
| No hot water, mild weather, nobody vulnerable in the house | Morning |
Not sure which yours is? Ring us anyway and we will tell you honestly. If it can wait until morning you will pay less, and we would rather say so than charge you for a callout you did not need.
Why old taps are sometimes the awkward ones
Replacing a tap on an older bath or basin round here is often harder than replacing the whole fitting, because the back nuts are against a wall, corroded solid, and reachable only by somebody with the right spanner and a forgiving temperament.
That is the difference between a twenty minute job and a two hour one, and it is why a cheap price quoted down the phone for a tap change sometimes changes on arrival. We would rather look first and tell you honestly.
Is it urgent, or can it wait until morning?
A dripping tap is never an emergency. A tap you cannot turn off, on a supply you cannot isolate, is.
If you cannot stop the water, that is the call to make now.
What we will ask you on the phone
Having these ready makes the call shorter:
Whether it drips from the spout or leaks from the base
Whether it is a single tap, a mixer or a monobloc
Whether there are isolating valves under the sink, and whether they turn
Whether you want it repaired or replaced
A photo, if you can send one
Repair or replace
Repair, nearly always. Most taps take a standard washer or cartridge and will outlive several of them.
Replace when the body is corroded, when the finish has gone and you mind, or when the fitting is being changed anyway. We will tell you when a tap is genuinely past it, and more often we will tell you it is not.
What tap repairs cost
You are told the callout before we set off, not after we arrive. The part itself is almost always the smallest number in the job.
Where a price can move is on seized fittings, so if your taps are old and have never been touched, say so when you ring and we will come prepared rather than surprised.
Taps in rented property
Dripping taps are the most commonly ignored repair in let property and among the cheapest to fix, which is a bad combination on a metered supply.
If you let, it is worth doing them all in one visit rather than one at a time as tenants report them. Several taps in a visit costs far less per tap than several callouts, and a tenant who sees things fixed properly reports the next thing sooner.
We will arrange access directly with the tenant.
Where we cover

We are based at The Stables, Queens Avenue, Pontefract, WF8 4SF, and we work across Pontefract, Knottingley, Castleford, Featherstone, Ackworth, Darrington, Normanton and the wider Wakefield district.
Getting more life out of your taps
Clean the aerators twice a year. Two minutes per tap, and it prevents the commonest complaint about taps round here.
Do not over-tighten them. A tap that needs force to stop dripping has already lost its washer, and forcing it damages the seat as well, which turns a cheap job into a less cheap one.
Turn your isolating valves once a year so they do not seize. Nobody does this and everybody wishes they had.
And fix a dripping hot tap before a cold one if you are choosing. You are paying to heat that water.
Need a plumber?
Tell us what is wrong and we will come back to you with a free written quote.
Recommended Seasonal Jobs
Winter is coming - get your home ready now.
Plumbing
Keep your pipes flowing smoothly and avoid nasty surprises this winter.
Heating
Stay cosy - book a Cornel heating check before the cold sets in.
Roofing
Fix small problems now for a roof that can stand up to winter weather.
Radiators
Upgrade your home with new radiators for warmer, more efficient heating.
Gutters
Clear away autumn leaves and prevent blockages before heavy rain and frost.
Boilers
Keep your boiler running safely and reliably when you need it most.
Electrical
From lighting to safety checks, our electricians keep your home powered up.
Chimneys
Enjoy safe, crackling fires with a freshly swept chimney this winter.
FAQ
Frequently Asked Questions
Clear, honest answers to the things people ask us most. If you can’t find what you need, just get in touch - we’re happy to help.
